1.5 FT Dual Drive IDE Cable - 40 Pin

NetConnex's Ultra33 IDE Ribbon Cables can be used to connect 2 IDE/ATAPI devices to your motherboard or host controller. 

• 1.5 foot 40-pin / 40-wire Ultra33 IDE Cable
• Connectors: Female 40-pin IDS to two 40-pin IDS
• Designed for use with IDE/ATAPI devices such as hard drives, cd-rom drives, etc.

Click Here for More Info

3 FT Round Ultra ATA 133 EIDE Cable - Yellow IDCx3

Our 3 FT Round Ultra ATA 133 EIDE Cable - Yellow IDCx3 Round Ultra ATA133 EIDE Cables provide the performance you expect from your Ultra DMA IDE drives as well as a cleaner looking case with increased air circulation.  The Ultra DMA interface allows computers to read and write data faster reducing disk bottlenecks.  The 40-pin, 80-wire Ultra ATA133 cable has reduced interference which boosts signal integrity allowing for higher transmission rates.  By increasing air flow these cables also reduce over-heating and save internal space.  These Ultra ATA133 ribbon cables are compatible with Ultra 133/100 and Ultra 66 drives.  Plus they are backwards compatible with Ultra33 and just about all IDE/ATAPI devices.

• 3 foot 40-pin / 80-wire Ultra133 EIDE Cable
• Connectors: Female 40-pin IDS to two 40-pin IDS
• Increases air flow reducing over-heating
• Designed for use with Ultra 133/100/66 devices such as hard drives, cd-rom drives, etc.

Click Here for More Info

2 FT Round Ultra ATA 133 EIDE Cable - Clear IDCx3

Our 2 FT Round Ultra ATA 133 EIDE Cable - Clear IDCx3 Round Ultra ATA133 EIDE Cables provide the performance you expect from your Ultra DMA IDE drives as well as a cleaner looking case with increased air circulation.  The Ultra DMA interface allows computers to read and write data faster reducing disk bottlenecks.  The 40-pin, 80-wire Ultra ATA133 cable has reduced interference which boosts signal integrity allowing for higher transmission rates.  By increasing air flow these cables also reduce over-heating and save internal space.  These Ultra ATA133 ribbon cables are compatible with Ultra 133/100 and Ultra 66 drives.  Plus they are backwards compatible with Ultra33 and just about all IDE/ATAPI devices.

• 2 foot 40-pin / 80-wire Ultra133 EIDE Cable
• Connectors: Female 40-pin IDS to two 40-pin IDS
• Increases air flow reducing over-heating
• Designed for use with Ultra 133/100/66 devices such as hard drives, cd-rom drives, etc.

Click Here for More Info

3 FT Round Ultra ATA 133 EIDE Cable - Black IDCx3

Our 3 FT Round Ultra ATA 133 EIDE Cable - Black IDCx3 Round Ultra ATA133 EIDE Cables provide the performance you expect from your Ultra DMA IDE drives as well as a cleaner looking case with increased air circulation.  The Ultra DMA interface allows computers to read and write data faster reducing disk bottlenecks.  The 40-pin, 80-wire Ultra ATA133 cable has reduced interference which boosts signal integrity allowing for higher transmission rates.  By increasing air flow these cables also reduce over-heating and save internal space.  These Ultra ATA133 ribbon cables are compatible with Ultra 133/100 and Ultra 66 drives.  Plus they are backwards compatible with Ultra33 and just about all IDE/ATAPI devices.

• 3 foot 40-pin / 80-wire Ultra133 EIDE Cable
• Connectors: Female 40-pin IDS to two 40-pin IDS
• Increases air flow reducing over-heating
• Designed for use with Ultra 133/100/66 devices such as hard drives, cd-rom drives, etc.

Click Here for More Info