Fiber OWL 4 optical power meter

The Fiber OWL 4 optical power meter from NetConnex is a highly accurate hand-held optical power meter, capable of performing a wide range of functions from simple optical power and loss measurements to standards-based link certification. Its built-in Link Wizard walks the user through a series of steps, prompting the user to pick the parameters of their link under test, and sets an optical reference based on the se parameters. This optical reference is used as a point of reference by which a link will PASS or FAIL against the chosen fiber standard.

When used with OWL WaveSource fiber optic light sources, the Fiber OWL 4 provides fiber optic professionals with automatic wavelength switching so that the meter and light source are always set to the same wavelength, and automatic dual-wavelength storage cuts down on testing time and human error. Up to 1000 fiber runs can be stored in memory, and can be downloaded into a PC using our Free OWL Reporter software via the supplied serial cable.

OWL Reporter displays fiber tests in either a summary or detail view, and prints out professional-looking certification reports that can be passed along to customers as proof of link certification. Data can also be saved to hard disk for later retrieval. A 2.5mm universal and 1.25 universal connector port are included to connect a wide variety of popular fiber optic connector, including SC, ST, FC, LC, and SFF.

A filtered detector option is available for high-power applications such as CATV and Telco (“C” versions), and the Fiber OWL 4 BOLT (“B” versions) comes configure with an integrated length tester used for accurate optical length measurement of a fiber link. The Fiber OWL 4 is enclosed in high-impact plastic, and a protective rubber boot provides additional shock protection. It’s large back lit display is easy to read, and the 18-key pad allows for easy data entry. It can be used in many test environments, including LAN, MAN, WAN, FTTH, Telco, CATV, Manufacturing, and Laboratory.

• Applications Include:
• Certification Testing
• Active Equipment Optical Power Testing
• Attenuation Testing
• FTTH Link Loss Verification
• Optical Loss Testing
• Patch Cord Testing

Click Here for More Info

Fiber OWL 4 / WaveSource SM FC test kit

Fiber OWL 4 / WaveSource SM FC test kit from NetConnex are ideal for the fiber optic professional who requires standards-based certification of fiber link, including TIA-568, ISO 11901, various Ethernet standards, among others. The Fiber OWL 4 can also be configured with custom standards to meet the needs of various fiber optic applications. All fiber OWL 4 Series test kits come with a Fiber OWL 4 Series optical power meter and a WaveSource Light source, and can also include a visual fault locater Accessories included: a hard –shell carrying case, protective rubber boots, carrying straps, download cable, 0-volt batteries, NIST-traceable certificate of calibration, and a CD-ROM containing product manuals and OWL Reporter software.

• WaveSource light sources come in three versions:
• WaveSource MM - Contains a stabilized dual-wavelength LED source (850 and 1300nm) in a single port for accurate testing of multimode fibers; can also include a VFL port.
• WaveSource SM – Contains a stabilized dual-wavelength laser source (1310 and 1550nm) in a single port for accurate testing of singlemode fibers; can also include a VFL port.
• WaveSource Quad – Contains all four wavelength (850 & 1300nm for multimode; 1310 & 1550nm for singlemode) in a single unit.

Click Here for More Info

Fiber OWL 4 BOLT optical power meter

The Fiber OWL 4 BOLT optical power meter from NetConnex is a highly accurate hand-held optical power meter, capable of performing a wide range of functions from simple optical power and loss measurements to standards-based link certification. Its built-in Link Wizard walks the user through a series of steps, prompting the user to pick the parameters of their link under test, and sets an optical reference based on the se parameters. This optical reference is used as a point of reference by which a link will PASS or FAIL against the chosen fiber standard.

When used with OWL WaveSource fiber optic light sources, the Fiber OWL 4 provides fiber optic professionals with automatic wavelength switching so that the meter and light source are always set to the same wavelength, and automatic dual-wavelength storage cuts down on testing time and human error. Up to 1000 fiber runs can be stored in memory, and can be downloaded into a PC using our Free OWL Reporter software via the supplied serial cable.

OWL Reporter displays fiber tests in either a summary or detail view, and prints out professional-looking certification reports that can be passed along to customers as proof of link certification. Data can also be saved to hard disk for later retrieval. A 2.5mm universal and 1.25 universal connector port are included to connect a wide variety of popular fiber optic connector, including SC, ST, FC, LC, and SFF.

A filtered detector option is available for high-power applications such as CATV and Telco (“C” versions), and the Fiber OWL 4 BOLT (“B” versions) comes configure with an integrated length tester used for accurate optical length measurement of a fiber link. The Fiber OWL 4 is enclosed in high-impact plastic, and a protective rubber boot provides additional shock protection. It’s large back lit display is easy to read, and the 18-key pad allows for easy data entry. It can be used in many test environments, including LAN, MAN, WAN, FTTH, Telco, CATV, Manufacturing, and Laboratory.

• Applications Include:
• Certification Testing
• Active Equipment Optical Power Testing
• Attenuation Testing
• FTTH Link Loss Verification
• Optical Loss Testing
• Patch Cord Testing

Click Here for More Info

Fiber OWL 4 BOLT high-power optical power meter

The Fiber OWL 4 BOLT high-power optical power meter from NetConnex is a highly accurate hand-held optical power meter, capable of performing a wide range of functions from simple optical power and loss measurements to standards-based link certification. Its built-in Link Wizard walks the user through a series of steps, prompting the user to pick the parameters of their link under test, and sets an optical reference based on the se parameters. This optical reference is used as a point of reference by which a link will PASS or FAIL against the chosen fiber standard.

When used with OWL WaveSource fiber optic light sources, the Fiber OWL 4 provides fiber optic professionals with automatic wavelength switching so that the meter and light source are always set to the same wavelength, and automatic dual-wavelength storage cuts down on testing time and human error. Up to 1000 fiber runs can be stored in memory, and can be downloaded into a PC using our Free OWL Reporter software via the supplied serial cable.

OWL Reporter displays fiber tests in either a summary or detail view, and prints out professional-looking certification reports that can be passed along to customers as proof of link certification. Data can also be saved to hard disk for later retrieval. A 2.5mm universal and 1.25 universal connector port are included to connect a wide variety of popular fiber optic connector, including SC, ST, FC, LC, and SFF.

A filtered detector option is available for high-power applications such as CATV and Telco (“C” versions), and the Fiber OWL 4 BOLT (“B” versions) comes configure with an integrated length tester used for accurate optical length measurement of a fiber link. The Fiber OWL 4 is enclosed in high-impact plastic, and a protective rubber boot provides additional shock protection. It’s large back lit display is easy to read, and the 18-key pad allows for easy data entry. It can be used in many test environments, including LAN, MAN, WAN, FTTH, Telco, CATV, Manufacturing, and Laboratory.

• Applications Include:
• Certification Testing
• Active Equipment Optical Power Testing
• Attenuation Testing
• FTTH Link Loss Verification
• Optical Loss Testing
• Patch Cord Testing

Click Here for More Info