2 Host Ports/14 Port RJ45 Passive Hub - pins 1 & 2

2 Host Ports/14 Port RJ45 Passive Hub - pins 1 & 2 from NetConnex. The ETS TP2000 Balanced Star Hub is designed to give system AS400 and S3X networks greater system dependability by delivering clear signals in both directions to IBM specifications. The TP2000 uses minimum components and no external power source for greater ability.

The TP2000 uses patented, system transparent, impedance-matched Balanced Line technology achieves outstanding impedance balance, and low noise performance. Balanced Line technology rejects most reflected and induced noise within network wiring and allows the greatest signal distance of any non powered hub. The TP2000 comes in sizes to support 2, 4 or 8 host ports and up to 56 ports available for workstations within one rack or wall mount enclosure.

Features/Advantages

• Balanced Star™ design achieves best noise suppression
• Use economical UTP and star configuration
• Passive design is transparent to hosts and terminals
• Wire runs can be up to 2000 feet from the host to any terminal
• Five Year Warranty
  
  Specifications
• Connectors RJ45 pins 4 & 5 (opt. 1 & 2)
• Evirornmental 0 to 80º C, 10 to 95% humidity, non-condensing
• Impedance 100O +/- 15% at 1 MHz
• Noise Rej. CMRR 60 dB min.
• Thru Attenuation < 14.5 dB
• Physical H x W x D, mm; Net Weight (kg)
• TP2000-1-xxx - 45 x 250 x 79; 0.39
• TP2000-2-xxx - 45 x 483 x 74; 0.77
• TP2000-4-xxx - 89 x 483 x 74; 1.27
• TP2000-8-xxx - 133 x 483 x 74; 2.04

Click Here for More Info

Digital AES/EBU RG59 Splitter Panel - 4 Port

Digital AES/EBU RG59 Splitter Panel - 4 Port from NetConnex. The ETS PA820 RG59 Splitter and the PA778x Series of AES/EBU Splitter Panels are carefully designed to divide the energy from a single source into equal parts, maintaining precise impedance matching. Return signals are routed back to the source with minimal crosstalk to the other port.

These devices were expressly crafted for AES/EBU standard for digital audio. They minimize losses while preserving signal integrity As an added benefit, our precision impedance matching technology allows for units to be non-symmetrically applied when being cascaded. Please note that each cascade stage reduces the signal level by 3 dB.

Features/Advantages

• Allows two outputs from a single source, without interference or impedence mismatching
• Individual splitters, or rack mountable panel versions
• Panel mount models available from 2 to 12 channels
• Can be cascaded non-symmetrically for multiple outputs
• Metal cases, chassis
• Made in USA. 100% QA.
  
  Specifications
• Bandwith 10 kHz to 50 MHz
• Connectors (3) BNC female 75O +/- 2% 50 kHz to 50 MHz (*Note - Splitting reduces signal level by 3 dB)
• Crosstalk 35 dB down 50 kHz to 30 MHz
• Dimensions Panels: 1 RU x 80 mm deep, Baluns: 69mm x 69mm x 33mm

Click Here for More Info

Active VGA Set Dual Output + AC Transformer

Active VGA Set Dual Output + AC Transformer from NetConnex. The ETS-PV937-2 Active VGA Set, Dual Output is based on solid foundation of our Passive VGA balun series. This first product in the Active VGA line from ETS allows signals to be sent from a computer over a single 4 pair UTP run at distances of over 100 meters.

At the source end, a passive technology balun (PV938) with a 15pin HDD connector cable hooks to your computer. At the receiving end, the PV939-2 (powered via AC transformer) actively regenerates the RGBHV signals from the source, and splits to provide two outputs.

Caution: This product does not work with most LCD and other flat panel displays.

Features/Advantages

• Transmit XGA signals on a single run of 4 pair UTP
• Active reciever regenerates signals, splits to provide (2) outputs at reciever end
• Passive send unit at computer
• Compact plastic cases
• Made in USA. 100% QA.
  
  Specifications
• Bandwith Flat to 60 MHz
• Connectors 15p HDD to RJ45
  Red: HDD 1(6gnd) to 1 & 2 RJ45
  Green: HDD 2 (7gnd) to 4 & 5 RJ45
  Blue: HDD 3 (8gnd) to 7 & 8 RJ45
  H & V sync: HDD 13, 14 to 3 & 6 RJ45
• Power: 9 VDC, 500mA, (+) center (for ETS-PV939-2)
• Demensions 140mm x 85mm x 40mm (ETS-PV939-2) - 66mm x 66mm x 28mm (ETS-PV939-2)

Click Here for More Info

VGA Video Balun Set - PV931 + PV932

VGA Video Balun Set - PV931 + PV932 from NetConnex. The ETS PV930 VGA Video Balun Set allows computer video signals that adhere to the VGA/SVGA/XVGA standards to be transmitted over CAT5 or better UTP wiring. All modes and resolutions operate normally. Distance and quality of transmission are dependent on type of cable used and monitor sync circuitry. The circuitry in the PV930 set of VGA Video baluns in fully passive, requiring no external power.

Caution: This product does not work with most LCD and other flat panel displays.

For running multiple monitors and/or daisy-chaining applications, please look at the ETS-PV937-2 Active VGA product set.

Features/Advantages

• Transparent operation
• Compatible with all VGA/SVGA/XVGA modes
• Supports EPA "Energy Star" standard
• Rugged plastic cases
• Made in USA. 100% QA.
  
  Specifications
• Bandwith Flat to 60 MHz (RGBHV)
• Connectors 15p HDD to RJ45
  Red: HDD1(&6) to 1 & 2 RJ45
  Green: HDD 2(&7) to 4 & 5 RJ45
  Blue: HDD 3 (& 8) to 7 & 8 RJ45
  H & V sync: HDD 13, 14 to 3 & 6 RJ45
• Dimensions 66mm x 66mm x 28mm (PV931, PV932) + 6" pigtail on PV931

Click Here for More Info